- Hytera Portable. PD782G (Right Click Save As) (updated 25 March 2019) (CPS V8.05.06.011.NA2) X1p (Right Click Save As) (updated 25 July 2016) (CPS V7.06.02.008.NA2) Alinco Portable. DJ-MD5/AT-D868UV/AT-D878UV (Right Click Save As) (updated 25 March 2019) DJ-MD5 Programming Software (v1.10) Anytone Portable.
- 2: Power Switch, Programming Software, or Remote Software Access (XNMS) (Wall Mount, Shore Power ready, 25 Watt Continuous Duty) 5: Limited display on speaker/mic 6: Power, Numeric Display, Channel, Speaker/Microphone with Volume (Backpack, Battery 10 hour Powered, IP67 Rating, 10 Watt Continuous Duty).
- Digital Migration Radio. PROFESSIONAL AND SIMPLE TO USE. Compatible with analog conventional and digital conventional modes. Allow MD612i to simultaneously monitor analog and digital modes and automatically respond in each mode. It is an easy way for migration to digital from analog.
- Hytera Pd782g Programming Software Download
- Programming software, free download
- Programming Software C++ Download
- Hytera Pd782g Programming Software Update
Hytera Pd782g Programming Software Download
The Hytera PD782/G is a commercial grade mid-tier DMR portable radio being offered by Hytera Communications, a Chinese manufacturer of communications equipment. This unit packs many features that hams will find valuable, including a colour LCD display, loud crisp audio, solid construction, 1,024 channels and front keypad programmability (aka FPP). This is a good radio for anyone looking for a durable DMR radio and at the time of this review, the ham friendly pricing from an authorized Hytera dealer was $680 USD.
Programming Hytera DMR Radios with Hytera CPS, an introduction to programming Hytera DMR radios for HAM Radio or Commercial use. Hytera Rapid Charger CH10A07-PS1014 PD702 PD782 PD502 PD792 PD782G PD702G PD562G. Hytera MD612i Customer Programming Software with the Latest Firmware & Drivers.
Programming software, free download
Author’s Rating: 4/5
The Good | The Bad |
The Hytera PD782 comes standard with the following items out of the box:
- Stubby antenna;
- Rapid charger;
- Belt clip;
- 7.4V, 2,000 mAH Li-ion battery;
- 3-year manufacturers warranty.
The Full Review
The Hytera PD782 & 782G (G for GPS enabled) is a commercial grade mid-tier DMR portable radio being offered by Hytera Communications, a Chinese manufacturer of communications equipment. The PD782 is available for operation in the following bands: UHF1: 400-470MHz, UHF2: 450-520MHz, UHF3: 350-400MHz, UHF5: 806-941MHz, VHF: 136-174MHz. This unit packs many features that hams will find valuable, including a colour LCD display, loud crisp audio, solid construction, 1,024 channels and front keypad programmability (aka FPP) and is similar in quality to other mid-tier radios such as the Motorola XPR 7550. The signature design of Hytera radios is that they have their antennas situated at the top centre of the radio, unlike with most other portable radios, which have their antennas situated on either to the top left or top right of radio. This radio is also available in Europe, the Middle East and Asia as the PD785 & PD785G.
DON’T MISS: Motorola MOTOTRBO XPR 7550 DMR Portable Radio Review
The PD782 is quite an easy radio to program and use, as the menu structure of the radio and the programming software are both rather intuitive to use, making them a snap to set-up. To obtain the programming software, one must purchase it directly from an authorized Hytera dealer for $105 USD, however firmware updates can be obtained from a dealer at no charge. Likewise, the programming cable can also be purchase from a Hytera dealer for about $50 USD, or you take your chances and purchase an aftermarket version available on eBay for about $20 USD. Since the radio comes in different models for various regions, users who have North American PD782 will not be able to program it using the programming software from Asia or Europe. Of course, with hams being a resourceful lot, there are documented procedures on how you can mod programming software from one region so that it can program Hytera units in another region.
One feature that many hams will appreciate about the PD782 is that is has a 4.6 cm x 4.6 cm (1.8 in x 1.8 in) colour LCD display. This makes operating the radio a treat, as the screen can accommodate the required call sign, talkgroup or other details quite nicely. In addition, the PD782 allows the user to switch between day and night modes, make the screen much easier to read during bright or low light conditions.
For any ham users that need a radio that has loud crisp audio, look no further than this bad boy. Csv editor. The PD782 comes standard with 500mW of speaker audio power output and will be heard in almost any noisy environment. Also, the PD782 features a rugged construction and meets mil-spec rating MIL-STD-810 and the water and dust intrusion rating IP67, so this radio is likely to keep on ticking long after most ham portables call it quits. Also, One aspect of the PD782 that cause many hams to rejoice is that it allows for the connection of an external antenna, as it comes standard with a male SMA connection. In addition, for anyone looking to use the radio while driving in areas where hands-free operation is required by law, it is important to note that the PD782 does not support native hands-free operation via Bluetooth, however a Bluetooth adapter can be purchased from Hytera to allow this, plus 3rd party manufactures sell them for the PD782 as well.
Another feature of the PD782 that many hams will appreciate is its ability to be programmed via the keypad. This feature will allow users to add DMR channels on the go without the need of the programming software, however, it does have its limitations – users will be able to modify existing channel information, such as RX & TX frequency, timeslot, colour code, TX contact or RX group, however they cannot create a new TX contact or RX group on the go and will be restricted to use any of those already created. For many hams, this will be a minor inconvenience, making the radio an excellent choice for any user who travels a lot and wants to have the ability to manually enter DMR repeater information on the go.
Finally, one aspect of this radio that may impact the purchase decision for many hams is the length of its standard warranty. Unlike many budget DMR units that only include a 1-year warranty or Motorola gear, that includes a 2-year warranty, Hytera offers a 3-year warranty for the PD782, which is similar to the warranty offered by Vertex Standard for the EVX-539. For any hams that are concerned about hardware failures, this is definitely something worth considering when making their DMR radio purchase decision.
Conclusion
The Hytera PD782 is a great choice for anyone looking for a rugged mid-tier DMR radio for ham use. This radio packs a number of impressive features and is a wise choice for anyone that needs the ability to program their radio on the go without the need of a computer. That being said, the radio is not cheap, however Hytera delivers a great product for the price and is every bit the quality that you’d expect from other top-tier DMR radio manufactures like Motorola.
Disclosure: This is the only Hytera radio that the author owns.
If you found this review useful, please share it with your friends!
When you own a Hytera DMR transceiver you need an optional cable costing 35 euro to program your transceiver and/or to upgrade the firmware. In my opinion, programming cables should never be an option. You can spend the 35 euro to buy one, or spend about 5 euro to make one yourself.
The self-build version had one big advantage above the commercial one: it fits in the back of the transceiver so no need to change the microphone every time you want to program an extra channel.
German operator DJ8TM had created some nice drawings on how to build it. Keep in mind you can only buy the connector for the MD785(G) and the RD985(G), not the portable sets since these use some sort of Hytera made proprietary connector. You also notice these cables don’t have a CPS/FW switch to change the cable from a programming cable to a firmware-update cable. Don’t worry, switching can be done with the default microphone and the default microphone hang clip (which has some sort of magnetic contact). The mentioned cables work in CPS mode (programming) by default. If you want to switch to firmware-update mode simply connect the microphone to the microphone (wall)clip and it’s in FW mode.
N.b.: This cable does not work in combination with the SM-19 DTMF microphone. The default mike is okay.
Shopping list (Conrad):
- 741650-89 Assmann WSW A-HDS 26 LL/Z D-SUB male connector 180 °
- 715980-89 Assmann WSW A-FT 15 D-SUB case
- 502149-89 (Option: Ferrite, you should have some in the part-box)
- USB cable (you should have some in the part-box)
Total cost: less than 5 euro (excluding shipping)
Programming Software C++ Download
[important]Download the electronic circuit[/important]